Manomat / Automat

The roller adjustment wheel and unique synchro drive system ensure maximum ease of use. The stepless roller adjustment enables the minimum required end thickness to be set with great accuracy. This means that you get longer bands and thus a larger number of products from the same volume of dough. The Automat’s automatic roller adjustment makes it easy for less-skilled personnel to produce accurate and consistent dough bands.

You are no doubt familiar with the tendency of thin dough bands to buckle up and form waves, and ultimately even to tear. You can quickly and easily eliminate this problem with the synchro drive on the Manomat and Automat. Just press the reversing lever fully down and the waves disappear instantly. The synchro drive reduces the infeed speed, enabling you to sheet the thinnest doughs to perfection.

The baker chooses the reduction steps himself. Large graduations assist precise settings, increasing yields and uniformity.

The reduction steps are automatically set by one of the four roller reductions programs. Therefore, even less skilled operators can produce excellent quality dough sheets.

Substructure A-frame	in stainless steel
Automatic flour duster	optional
Width of conveyor belts	635 mm
Table width	650 mm
Table lenght overall	2720 mm
Roller lenght	660 mm
Roller gap	0,5-45 mm
Speed of discharge conveyor	60 cm/s
Rated power	1,5 kVA
Required floor-space in working position:
- catch pans extended	1215x3200 mm
- resting position	1215x1440 mm
Rated power	1.5 kVA/0.9 kh
Supply voltage	3x200-420V
	50/60 Hz
Weight	230 kg

Substructure A-frame	in stainless steel
Automatic flour duster	optional
Width of conveyor belts	635 mm
Table width	650 mm
Table lenght overall	3320 mm
Roller lenght	660 mm
Roller gap	0,5-45 mm
Speed of discharge conveyor	60 cm/s
Rated power	1,5 kVA
Required floor-space in working position:
- catch pans extended	1215x3800 mm
- resting position	1215x1760 mm
Rated power	1.5 kVA/0.9 kh
Supply voltage	3x200-420V
	50/60 Hz
Weight	235 kg

Substructure A-frame	in stainless steel
Automatic flour duster	optional
Width of conveyor belts	635 mm
Table width	650 mm
Table lenght overall	2720 mm
Roller lenght	660 mm
Roller gap	0,5-45 mm
Speed of discharge conveyor	60 cm/s
Rated power	1,5 kVA
Required floor-space in working position:
- catch pans extended	1215x3200 mm
- resting position	1215x1440 mm
Rated power	1.5 kVA/0.9 kh
Supply voltage	3x200-420V
	50/60 Hz
Weight	235 kg

Substructure A-frame	in stainless steel
Automatic flour duster	optional
Width of conveyor belts	635 mm
Table width	650 mm
Table lenght overall	3320 mm
Roller lenght	660 mm
Roller gap	0,5-45 mm
Speed of discharge conveyor	60 cm/s
Rated power	1,5 kVA
Required floor-space in working position:
- catch pans extended	1215x3800 mm
- resting position	1215x1760 mm
Rated power	1.5 kVA/0.9 kh
Supply voltage	3x200-420V
	50/60 Hz
Weight	240 kg